Full screen. Your default view.
See larger views from your factory cameras and choose the default views for both the front and rear cameras. Set up the views you want to see when each camera opens.
Full Screen Cameras
$149.99
Skip to product information
Full Screen Cameras
$149.99
A larger, easier-to-see view from your factory cameras.
Full Screen Cameras turns your Ford Explorer’s small factory camera views into a larger display on your existing screen. It is a USB installer for 2020–2024 Ford Explorers.
What you receive
A physical USB flash drive shipped to you with the installation loaded onto it. This is a software add-on; replacement cameras and a replacement screen are not included.
Over-the-air updates
Includes over-the-air updates for your genuine copy of Full Screen Cameras. Connect your Explorer to Wi-Fi with internet access for activation and updates. Your VIN is used to verify that your copy is genuine; non-genuine copies will not receive future updates.
Your vehicle’s VIN
Enter your 17-character VIN before adding this product to cart. The VIN is saved with the item and included in your order. Find it on the driver’s side dashboard near the windshield, the driver’s door label, or your vehicle registration.
Check compatibility and read the installation risk disclaimer on the product page before ordering. Installation and use are at your own risk. By purchasing or using this product, you acknowledge and agree to the disclaimer.
Not endorsed by or affiliated with Ford Motor Company.
You may also like
1 / 2
More screen. A clearer view.USB installer
Jagger Innovations / Explorer add-ons
2020–2024 Ford ExplorerFull Screen Cameras
Small factory view.
A bigger picture.
Turn your Explorer’s small factory camera views into a larger, easier-to-see display. Full Screen Cameras is a USB installer for 2020–2024 Ford Explorers. Requires factory Rear and 360 cameras, the 10-inch vertical (portrait) radio, and FMods already installed. Your physical USB flash drive ships with the installation loaded onto it. Includes over-the-air updates for genuine copies. You must connect your Explorer to Wi-Fi with internet access for activation and updates. Non-genuine copies will not receive future updates.
$149.99Plus taxes and shipping · Calculated at checkout
Ships in 5–7 business days.
Get in touchA FIRST FOR JAGGER INNOVATIONS
More than a bigger picture.
Our first Explorer add-on with over-the-air updates brings larger camera views, extensive customization, and simple management to your factory screen. Activate it during installation, make it your own, and receive future bug fixes and new features over Wi-Fi—no computer or USB needed for updates.
A layout that works for you.
Customize the controls layout, parking sensor location, background, and more. Adjust the camera interface to suit the way you use your Explorer.
A bigger view while parking.
The larger camera views extend to Active Park Assist, too. Choose where its on-screen instructions appear so the guidance fits your preferred layout.
Keep the features you use.
Retains trailering functionality and cross-traffic alerts when those alerts are enabled through FORScan. Your existing vehicle equipment and enabled features determine what is available.
Updates without the extra steps.
Receive bug fixes and new features over Wi-Fi as updates become available. After the initial USB installation, updates require no computer or USB flash drive. An internet connection and a genuine, activated copy are required.
On or off. Anytime.
Easily enable or disable Full Screen Cameras from Settings. Switch the add-on on or off whenever you want—no reboot, computer, or USB needed.
Activate once. Uninstall in one click.
Activate Full Screen Cameras during installation through Add-On Manager. If you decide to remove it, one-click uninstall removes the add-on without leaving its files behind—no computer or USB required.
INSTALLATION INSTRUCTIONS
Install. Activate. See more.
Use the supplied USB flash drive twice, then activate Full Screen Cameras from your radio’s settings. Your Explorer must be connected to Wi-Fi with internet access for activation. Wait the full five minutes after each of the first two reboots.
Install Add-On Manager
Turn on the vehicle and let the radio boot completely. Wait 5 minutes after the radio has fully booted, then insert the USB flash drive into your vehicle’s USB port. The first insertion installs Add-On Manager.
Remove the USB and wait
When the radio prompts you to remove the USB, remove it. The radio will reboot. After it has rebooted, wait 5 minutes before continuing.
Install the camera add-on
Insert the same USB flash drive again to install the Full Screen Cameras add-on.
Remove the USB and wait again
When prompted, remove the USB. The radio will restart. After it has rebooted, wait another 5 minutes.
Activate Full Screen Cameras
Connect your Explorer to Wi-Fi with internet access. This connection is required for activation. Go to Settings > Add-On Manager. Find Full Screen Cameras, which will show Needs activated. Tap it, then tap Activate at the bottom.
Let activation finish
The radio will check that your copy is genuine, download and install the add-on, then restart. Non-genuine copies will not receive any future updates. After it reboots, Full Screen Cameras is installed and ready to use. Look for the new camera settings tile in the add-on section of the Settings page.
Before you order
Know your upgrade.
Check the vehicle details and read the installation risk disclaimer before purchasing.
What does Full Screen Cameras do?
It turns the smaller factory camera views into a larger, easier-to-see view on your existing screen.
Which Explorer model years is it for?
Requires a 2020–2024 Ford Explorer with factory Rear and 360 cameras, the 10-inch vertical (portrait) radio, and FMods already installed. Rear-only cameras and 8-inch horizontal radios are not compatible.
What do I receive?
A USB flash drive with the installer loaded onto it and installation instructions, shipped to you. No replacement display or cameras are included.
Why do I need to enter my VIN?
Your 17-character VIN identifies the vehicle for this order. We save it with the item so it remains attached to your purchase. It is also used to verify that your copy is genuine. Non-genuine copies will not receive future updates.
Installation risk & disclaimer
By purchasing or using any Jagger Innovations product, you acknowledge and agree to this disclaimer.
Install and use all products, software, files, and instructions entirely at your own risk. Vehicle modifications and software installation can cause damage, data loss, malfunction, or permanently unusable (“bricked”) infotainment units or other vehicle modules, and may affect warranty coverage.
To the fullest extent permitted by applicable law, Jagger Innovations and its owner disclaim liability for damage, bricked units, repair or replacement costs, data loss, or other losses arising from installation, modification, or use of our products, software, files, or instructions.
Not endorsed by or affiliated with Ford Motor Company. Ford and Explorer names and trademarks belong to their respective owners and are used only to identify vehicle compatibility.